BNF-60A | ||||
Configuration Standard | Technical Parameters | Remarks | ||
Infrastructure | ||||
Main Machine Landing Area | (about) 2m2 | |||
Working Area | (about)12m2 | |||
Water Chiller Landing Area | (about)1m2 | |||
Working Area | (about)2m2 | |||
Whole Machine (L×W×H) | 1950×1000×1800mm | |||
Integrated Structure | Union mode | |||
Weight | (about)850Kg | |||
Machine case body | ||||
Case Body Material | 304 | |||
Opening Mode of Safety Guard | Handle Door | |||
Safety Guard Material | Organic Glass | |||
Frame Below Platform | Stainless Steel | |||
Case Body Shape | Square-shape | |||
Power, Main Motor etc. | ||||
Power Supply | 50Hz/380V 3P | |||
Main Motor | 1.1KW | |||
Hot Air Generator | 3KW | |||
Water Chiller | 1.9KW | |||
Jacket barrel heating power | 2 KW | Optional Additional cost | ||
Jacket barrel blending power | 0.18 KW | Optional Additional cost | ||
Production Capacity | ||||
Operation Speed | 30-50/min/max | |||
Filling Range | Plastic/laminated tube 5-250ml | |||
Suitable Tube Length | Plastic/laminated tube 50-210mm | Pipe length more than 210mm should customize | ||
Suitable Tube Diameter | Plastic/laminated tube 13-50mm | |||
Pressing Device | ||||
Pressing Guiding Main Component | CHINA | |||
Pneumatic Control System | ||||
Low Voltage Protection | CHINA | |||
Pneumatic Component | AIRTAC | |||
Working Pressure | 0.5-0.7MPa | |||
Compressed Air Consumption | 1.1m³/min | |||
Electrical Control System | ||||
Control Mode | PLC+Touch Screen | |||
PLC | TAIDA | |||
Frequency inverter | TAIDA | |||
Touch Screen | WE! | |||
Coder | OMRON | |||
Filling detect Photo electric cell | CHINA | |||
Total Power Switch etc. | ZHENGTA | |||
Color Code Sensor | JAPAN | |||
Hot Air Generator | LEISTER (Switzerland) | |||
Suitable Packing Material & Other Devices | ||||
Suitable Packing Material | Aluminum-plastic composite tube and Plastic composite tube | |||
Obliquely Hanging Lining-up Tube Storehouse | Speed Adjustable | |||
Material contacting with filling material | 316L Stainless Steel | |||
Jacket layer hopper device | Temp. Setting according to material and filling demand | Additional cost | ||
Jacket layer stirring device | In case of no material mixing, it remains fixed in hopper | Additional cost | ||
Auto stamping device | Single side or double sides printing at the end of seal tube. | Double sides additional cost |